Fast facts for Total Hunter

The worlds first interchangeable magazine inlet offers a wide range of action inlets and a total length of 498mm with 9 M-Lock slots allowing the user to mount M-lock compatible accessories along the length of the rail AND crossover the forend from Centerfire to Rimfire in a matter of minutes.

The demention’s of the forend allows enough clearance for a wide range of aftermarket M-lock accessories manufactured by other brands creating the flexibility across the entire forend side, with the use of the uniquely developed Total Hunter all brass Front slot cassette weights puts weight right were its needed up front and down low in the chassis stage 1,2,3 are available to modify the balance point along with the Sub Internal Arca and the extra heavy T-slot combined weights of 1.8kg bringing the combined total weight package to around 2.8kg forend included into your rifle, this lower centre of mass that is Sub internally placed under your barrel to stabilise the balance point of your rifle but also greatly reduces cant and recoil without compromising the look of your rifle and also fully freeing up the side M-LOC slots for you to place any grips or thumb stops where ever you like without compromise of weight distribution along the side M-locs.

Major advantages of the Total Hunter OIC-2 is that it is dynamic and flexible in pivoting uses you don’t need a competition barrel or set up once the forend is fitted to you KRG chassis to be competitive the forend fine tunes the balance point of any rifle barrelled action all the way from 22LR to a standard hunter style factory Centerfire you’ll be able to make those ELR shoots no problems and be extremely competitive with your standard rifle at PRS the massive advantages of the OIC-2 are that you can crossover your D.O.P.E and skills acquired from your PRS and apply them out in the field just by simply unbolting your Total Hunter forend and replacing it with the standard KRG to instantly transform your rifle back into a field rifle that is light, nimble and precise with knowing that all of the confidence you have learnt is still at your finger tips without having to change your barrelled action out of the KRG backbone it all still stays the same, the transition is extremely user friendly and can be done in a matter of minutes.

Hard anodised in a matt finish for maximum durability but also to compliment the standard look of your KRG chassis to ensure a uniform appearance.

Find out more about Total Hunter on Our story page for more details.

 FAQs

  • :Make sure that you haven’t loaded 11 rounds into 10 round magazine this will cause the magazine to bulge and it won’t clear the side walls for the mag well, empty magazine and reload and try again, if problems persist please contact support via email and we will get back to as soon as possible,

  • Lossen Forend bolts so there is movement in the 6 M5 slot holes provided insert magazine to adjust clearance at the front of the barricade stop and retighten to spec while the the magazine is inserted make sure mag is empty at all times use safe handling practices, refer to users manual for instructions

  • Inspect mag well for damage and or if there is not debirs stuck inside the locating lugs the surfaces must be a clean fit for this prt to function correctly,

  • Most certainly the OIC-2 has a hard anodised finish to match that of the KRG although its recommended that the internal areas of the Mag well and the inner back bone support is to be masked including all screw threads, this must be protected from paint and overspray including this also includes the bottom Arca rail so not to hinder the clamps/R-Loc functions of the ARCA rail and internals,

  • Most certainly will its a standard M-loc profile and can be fitted onto any other product that is running the same standard M-Loc profile,

  • Due to the nature that all rifles are different we have developed the NV bridges in an M-lock formate so you have the choice to fit any aftermarket picatinny hight rail to meet your setup so not to restrict the user can fine tune there daytime/ Night vision scopes and clip ons for the perfect set up.

  • Any permanent marker will do the trick hole spacing for marker is 16mm we suggest using a Posca pen or a sharpie for best results,

Enquires